Domain San Antonio Photo Gallery

 Site:

Owners of a 5,000 square foot home in the gated Domain community in San Antonio, Texas, needed reliable cellular signal inside the house due to one of the spouses being a transportation company owner and needing 24/7/365 connectivity.  They had a Cel-Fi Quatra cell phone signal booster system installed resulting in four to five bars of reliable 4G LTE cell phone reception around entire house including outdoor patio areas.

Issues:

The home owners needed quality 4G LTE cell phone signal for quality data and voice connectivity in their 5,000 square foot home.  Lack of 4G LTEcoverage in the house was due to their home's quality building materials including stucco, stone wall and Radiant Barrier insulation encompassing the building.  The home is built on a sloped site.  At the top of the hill driveway entrance there is good  quality service, but as you go down the hill toward the house, the cell signal decreases in signal strength.  The house had multiple attics which were not connected which made using solutions that ran off of coaxial cable impossible; but the house had been prewired with cat5e cable.  The original low voltage contractor did a poor job in terminating the cat5e ends by using wire nuts and crimp on connectors.  As part of the job, we redid all of the cat5e connectors and mounted a new termination box with proper telephone modules.

Radiant barriers are highly reflective and used to ensure radiant heat has been redirected.  Radiant barriers are heavily used in warm climates, particularly in American southern climates. However, the combination of a stucco wall and radiant barrier doesn't just block solar heat; it also affects cellular signal and radio waves from penetrating from outside. The result was no 4G coverage inside the home.

Solution:

A detailed survey was carried out across the home by our RF technicians. Signal readings were done from outside and inside the home for the most ideal cellular coverage amplifier to be recommended. The cable routes were impossible for coaxial cable solutions, but since the home had cat5e wiring in it, we were able to use the Cel-Fi Quatra as an excellent solution.

Due to the size of the home, building materials and other factors identified during the survey, Cel-Fi Quatra with three coverage units was selected because of its ability to work in large homes and receive some of the strongest cellular signal on the outside without any overload or damage on the amplifier unit.

Installation:

With the Cel-Fi Quatra, antenna and cable routes were identified and installation was carried out around the home. The entire signal amplifier set up process was carefully done to ensure the base signal boosting amplifier unit was well installed and in a safe place, including all other peripheral accessories.

Results:

Once the installation process was complete, the cell phone signal across the home was tested. The home owners started receiving reliable 4 - 5 bars of 4G LTE signal in all their devices throughout the home. Highly improved from before, the 4G LTE cell signal could be picked up in all rooms. Enhanced voice and data with 4G  speeds allowed the owners to connect successfully with the outer world from inside their home enhancing their work from home. 

Randolph Air Force Base in San Antonio, Texas had cellular reception problems.

Issues:

In two of the buildings on the base there were many offices which could not get proper cellular service due to the construction of the building.  The buildings are both two story brick commercial buildings with tar and gravel roofs.  This was a major impediment to proper cellular service.

Solution:

A detailed survey was done by our RF technicians.  Signal readings were taken inside and out and a plan was created to install a Wilson Pro 1000 system in each building with multiple indoor repeater antennae locations.  The Wilson Pro 1000 was selected for its strength and quality performance.  

Installation:

Using a Wilson Pro 1000 in each building, plenum fire rated cabling and multiple indoor antennae, the installation was done and provided excellent levels of cellular signal throughout the desired areas.

Site:

Owners of a 40,000 square foot manufacturing facility in Victoria, Texas which also encompassed two 4,000 square foot floors on top of each other of offices and a separate office wing with about 2,000 square feet of office space with little or no cellular signal inside the building.

Issues:

The owners needed quality 4G cell phone signal for quality data and voice connectivity in their facility; primarily in the office area, but also in the manufacturing area as well. Lack of 4G coverage in the building was due to building being constructed of corrugated metal and a corrugated metal roof as well. The building created a complete cellular dead-zone in its interior.

Corrugated metal buildings are very common and most have the same problems with cellular reception. Typically one has to sit near a window with your phone within a few feet of the window to get any significant cellular connection in these types of buildings. The result was no 4G coverage inside the 40,000 sq. foot building.

Solution:

A detailed survey was carried out across the building by our RF technicians. Signal reading was done from outside and inside the building for the most ideal cellular coverage amplifier to be recommended. The cable routes, as well as the best place for the installation of the new cell phone signal amplifier were also charted.

Due to the size of the building, the layout, building materials and other factors identified during the survey, two Sure Call Force5 2.0 amplifiers were proposed with 10 inside antennae. The Sure Call Force5 2.0 was selected because of its ability to work in large buildings and receive some of the strongest cellular signal on the outside without any overload or damage on the amplifier unit. The Sure Call Force5 2.0 cell phone reception amplifier also supports multiple cell carriers and multiple phones simultaneously.

Installation:

With the Sure Call Force5 2.0 amplifiers, antennae and cable route was identified and installation was carried out. The entire signal amplifier set up process was carefully done to ensure base signal boosting amplifier unit was well installed and in a safe place, including all other peripheral accessories.

Results:

Once the installation process was complete, the cell phone signal across the building was tested. They started receiving reliable 3-4 bars of 4G LTE signal throughout the building. 

Site:

Owners of a 6,000 square foot home in North Houston, Texas, needed a 4G cellular signal inside the house due to both spouses working from home frequently. They had a Wilson Pro cell phone signal booster system installed resulting in a 4G LTE cell phone reception around entire premise.

Issues:

The home owners needed quality 4G cell phone signal for quality data and voice connectivity in their 6,000 square foot home. As work from home entrepreneurs, 4G top speeds and quality voice network is of utmost importance. Lack of 4G coverage in the house was due to their home's quality building materials including a Stucco wall and Radiant Barrier insulation encompassing the building.

Radiant barriers are highly reflective and used to ensure radiant heat has been redirected. The radiant barrier was installed on the stucco wall to ensure solar heat is kept out of the home. Radiant barriers are heavily used in warm climates, particularly in American southern climates. However, the combination of a stucco wall and radiant barrier doesn't just block solar heat; it also affects cellular signal and radio waves from penetrating from outside. The result was no 4G coverage inside the 6,000 sq. foot home.

Solution:

A detailed survey was carried out across the home by our RF technicians. Signal reading was done from outside and inside the home for the most ideal and perfect cellular coverage amplifier to be recommended. The cable routes, as well as the best place for the installation of the new cell phone signal amplifier were also charted.

Due to the size of the home, building materials and other factors identified during the survey, a Wilson Pro 70 Plus was proposed with 4 inside antennae. The Pro 70 Plus was selected because of its ability to work in large homes and receive some of the strongest cellular signal on the outside without any overload or damage on the amplifier unit. The Wilson cell phone reception amplifier also supports multiple cell carriers and multiple phones simultaneously.

Installation:

With the Pro 70 Plus, antennas and cable route was identified and installation was carried out deftly around the home. The entire signal amplifier set up process was carefully done to ensure base signal boosting amplifier unit was well installed and in a safe place, including all other peripheral accessories.

Results:

Once the installation process was complete, the cell phone signal across the home was tested. The home owners started receiving reliable 2-3 bars of 4G LTE signal in all their devices throughout the home. Highly improved from before, the 4G LTE cell signal could be picked in all rooms. Enhanced voice and data with 4G speeds allowed the owners to connect successfully with the outer world from inside their home enhancing their work from home. 

Site:

Owners of a 10,000 square foot manufacturing facility in Buffalo, Texas which also encompassed 2,000 square feet of office space with little or no cellular signal inside the building.

Issues:

The owners needed quality 4G cell phone signal for quality data and voice connectivity in their facility. Lack of 4G coverage in the building was due to building being constructed of corrugated metal and a corrugated metal roof as well. The building was located very close to a cellular tower, but was in a low-lying area and constructed of metal. These factors created a complete cellular dead-zone in its interior.

Corrugated metal buildings are very common and most have the same problems with cellular reception. Typically one has to sit near a window with your phone within a few feet of the window to get any significant cellular connection in these types of buildings. The result was no 4G coverage inside the 10,000 sq. foot building.

Solution:

A detailed survey was carried out across the building by our RF technicians. Signal reading was done from outside and inside the building for the most ideal cellular coverage amplifier to be recommended. The cable routes, as well as the best place for the installation of the new cell phone signal amplifier were also charted.

Due to the size of the building, the layout, building materials and other factors identified during the survey, a Wilson WeBoost 4G-X amplifier was proposed with a single dome inside antenna. The WeBoost 4G-X amplifier was selected because of its ability to work in large buildings and receive some of the strongest cellular signal on the outside without any overload or damage on the amplifier unit. The WeBoost 4G-X cell phone reception amplifier also supports multiple cell carriers and multiple phones simultaneously.

Installation:

With the WeBoost 4G-x amplifier; antennae and cable routing was identified and installation was carried out. The entire signal amplifier set up process was carefully done to ensure base signal boosting amplifier unit was well installed and in a safe place, including all other peripheral accessories.

Results:

Once the installation process was complete, the cell phone signal across the building was tested. They started receiving reliable 3-4 bars of 4G LTE signal throughout the building. 

Site:

Owners of a 7,000 square foot home in Houston, Texas, needed a 4G cellular signal inside the house due to one of the spouses being an energy company executive and needing 24/7/365 connectivity to the company. They had a Sure Call Force5 2.0 cell phone signal booster system installed resulting in a 4G LTE cell phone reception around entire premise.

Issues:

The home owners needed quality 4G cell phone signal for quality data and voice connectivity in their 7,000 square foot home. As a major energy company executive, 4G top speeds and quality voice network is of utmost importance to be available 24/7/365 for connectivity to the company. Lack of 4G coverage in the house was due to their home's quality building materials including Stucco and stone wall and Radiant Barrier insulation encompassing the building.

Radiant barriers are highly reflective and used to ensure radiant heat has been redirected. The radiant barrier was installed on the stucco wall to ensure solar heat is kept out of the home. Radiant barriers are heavily used in warm climates, particularly in American southern climates. However, the combination of a stucco wall and radiant barrier doesn't just block solar heat; it also affects cellular signal and radio waves from penetrating from outside. The result was no 4G coverage inside the 7,000 sq. foot home.

Solution:

A detailed survey was carried out across the home by our RF technicians. Signal reading was done from outside and inside the home for the most ideal cellular coverage amplifier to be recommended. The cable routes, as well as the best place for the installation of the new cell phone signal amplifier were also charted.

Due to the size of the home, building materials and other factors identified during the survey, a Sure Call Force5 2.0 was proposed with 6 inside antennae. The Sure Call Force5 2.0 was selected because of its ability to work in large homes and receive some of the strongest cellular signal on the outside without any overload or damage on the amplifier unit. The Sure Call cell phone reception amplifier also supports multiple cell carriers and multiple phones simultaneously.

Installation:

With the Sure Call Force5 2.0, antenna and cable routes were identified and installation was carried out around the home. The entire signal amplifier set up process was carefully done to ensure base signal boosting amplifier unit was well installed and in a safe place, including all other peripheral accessories.

Results:

Once the installation process was complete, the cell phone signal across the home was tested. The home owners started receiving reliable 2-3 bars of 4G LTE signal in all their devices throughout the home. Highly improved from before, the 4G LTE cell signal could be picked in all rooms. Enhanced voice and data with 4G speeds allowed the owners to connect successfully with the outer world from inside their home enhancing their work from home.